What’s the Difference Between 80% and 90% Efficiency Furnaces?

Lets look at the differences in the two furnaces:

When you look at a Furnace you will see their ratings measured by their AFEU. (Annual Fuel Utilization Efficiency) Which Represents how much energy your furnace actually uses to heat your home and how much gets wasted. So basically an 80% efficiency furnace only heats 80% where as a 90% heats 90% of your home. While both heat your home that extra 10% really does make a difference in your home and your budget.
Another major difference between the two furnaces is how they are vented. The 80% efficiency furnace has a higher exhaust temp so it must be vented through a chimney via chimney liner. Where as a 90% efficiency furnace has a lower exhaust temp and are normally vented through PVC Pipe and are placed along side your home.

So if you happen to be in need or possibly thinking of switching your furnace don’t make it a horrible experience. 90% of your heat used efficiently, hassle free installation, and lower heating costs or 80% heat used, complicated install, and higher heating bills. This is one of those instances where bigger really is better, for your home and your pockets!

For more information, Install, or Repair go to our website or call Today!

Improving your furnace can save you money

Improving your furnace can save you money

Most people are locked in to their furnace type — you buy a home, it has a gas, oil, or electric-powered furnace, so that’s what you live with. Replacing a furnace is never an inexpensive proposition, and completely retrofitting a system — for example, replacing forced air with hydronic (hot water) heat can be prohibitively expensive.

The good news is that replacing an older furnace with a newer, more efficient furnace can result in significant cost savings — as well as being a positive step for the environment. The federal government is keenly interested in the effect on the environment of home heating systems and, as a result, as of May 1, 2013, federal regulations for non-weatherized furnaces of all types went into effect that require a minimum annual fuel utilization efficiency (AFUE) rating of 80 percent for gas furnaces, 83 percent for oil furnaces. On Jan. 1, 2015, additional regulations go into effect for weatherized furnaces requiring a minimum AFUE of 81 percent for gas, and 78 percent for oil. However, in 30 northern states, the standards for gas furnaces are more stringent – requiring a minimum AFUE of 90 percent. Weatherized furnaces are generally installed outdoors and non-weatherized furnaces are installed indoors.

Replacing an ailing or old furnace might also get you a tax credit. Although federal tax credits for most furnaces have expired, they are still available for geothermal heat pumps, which use heat from the ground. In addition, tax credits may be available from your state government, while your utility company may offer rebates for upgrading to more-efficient heating equipment. For a complete, state-by-state list of credits and rebates, visit the Database of State Incentives for Renewables & Efficiency (DSIRE) website.

Furnaces are generally powered by gas, oil or, occasionally, electricity. In colder climates, a more powerful, whole house system will be a necessity. More moderate climates may allow you to concentrate more on zone-type heating systems — such as heat pumps with space heaters as a supplemental heating source; check out our report on space heaters for some suggestions.

How to choose a furnace

Unless you are a near professional-level do-it-yourselfer, experts say you must work with a reliable contractor and let that person’s expertise guide you in choosing a furnace. A skilled heating, ventilation and air conditioning (HVAC) contractor will evaluate your home’s energy needs and help you choose a furnace that is the right size and efficiency for you, based on a number of factors.

With few exceptions, furnaces and installation are sold as package deals along with the installation. Any contractor you work with should offer you a choice of furnace models with different efficiency ratings and should provide an estimate of annual operating costs for each one. Most contractors specialize in working with certain brands of furnaces, and some shops work with only one particular brand. This can be an advantage, because it means the contractor has most likely received specialized training from the manufacturer. However, it means that your furnace choices will be limited to that one brand. If you get an estimate from a contractor who deals only in one brand, get estimates from other contractors as well, making sure the furnaces they recommend are equivalent in size and efficiency.

Another tip from experts is to steer clear of companies that offer to give you an estimate over the phone. A reliable estimate must be based on a thorough survey of your home. The contractor should consider such factors as the size of the house, insulation levels, number and type of windows and the climate in your area. He or she should inspect your ductwork (if any) for air leaks and insulation level and measure airflow levels. The contractor should also ask you about any problems you have had with your existing heating system. Based on all this information, the contractor can perform a heat-load calculation to determine the proper size of your new furnace.

A contractor should never base this decision on the size of your existing furnace. Many homes have furnaces that are too large, partly because sizing methods have improved and partly because buildings have become more energy efficient. A furnace that is too large will not only cost more to install and operate, but it may not heat your home as evenly as one that is properly sized. A good contractor should evaluate your entire heating system and make appropriate suggestions for improving the overall energy efficiency of your home. This may allow you to purchase a smaller furnace and save money.

Contact several contractors and get an estimate in writing from each one. Most sources recommend getting at least three estimates. If you already know a reputable HVAC contractor, start your search with that person. Focus on local companies, and look for contractors who are licensed and insured.

The written estimate you get from each contractor should spell out all the details about the installation. It should describe the equipment to be installed, the work to be done, the costs for materials and labor and the payment schedule. It should also describe the equipment and installation warranties and provide a firm date for completion of the project. Make sure bids include all costs associated with the project, including permit fees (if required). Compare all your estimates and make sure that they cover the same work and the same type of equipment.

It may be tempting to go with the contractor who offers you the lowest estimate, but experts warn that price is not the most important consideration. For example, very low bids may not include routine services and customary warranties. If one contractor’s bid is dramatically different from the others, don’t hesitate to ask why. It’s possible that this contractor has noticed something that others missed — or vice versa.

How we evaluated furnaces

No publications or web sites conduct comparative reviews of furnaces or rate individual models, and it’s easy to understand why. A tester would have to install furnaces in identical homes to compare them. How well a furnace functions depends on the installation of the whole system, including ductwork and venting. Factors such as climate, home size, insulation, window condition and usage will also affect performance. Even evaluating the long-term reliability of a particular model is problematic because furnaces are made to last 15 to 20 years, and technology can change a lot over such a long period.

However, if you are in the Houston area there are a number of helpful sources in detailing the types of furnaces available, new furnace technology, and how to choose the right furnace for you home, as well as discussions of whether or not a new furnace will be cost-effective. Houston heating can help you with all these topics.

If you are in need of a professional heating & air conditioning contractor in the Houston, TXlinois area please call or visit our website here to get things rolling.

Call for immediate consultation.

Top Rated Gas Furnaces

90 percent AFUE Gas Condensing Furnace

High-efficiency gas furnace:
Replacing your old gas furnace with a high-efficiency condensing gas furnace with an AFUE rating of 95 percent will save money, experts say. Even an upgrade from an 80 percent AFUE furnace saves $8 or so for every $100 you spend on heating. Whether this savings is enough to offset the extra up-front cost will depend on factors such as climate, utility rates, the efficiency of your old equipment and the energy efficiency of your home. However, experts say that if you live in an area with harsh winters, such as the Northeast or the Midwest, a condensing furnace most likely will pay for itself over time.

Est. $2,250 and up, installed Estimated Price

80 percent AFUE Gas Furnace

Budget gas furnace:
If you live in a state with milder winters, an 80 percent AFUE furnace may be all you need. The initial cost and installment cost is much less than a furnace with an AFUE of greater than 90 percent, and experts say an 80 percent AFUE gas furnace is likely to be considerably more efficient than the older unit you’re replacing. However, the break-even period will depend on your gas rates and how they change over time.

Est. $1,350 and up, installed Estimated Price

Heat Pump

Heating system for moderate climates:
Heat pumps may initially cost more than other heating systems to install, but reviewers say you’ll quickly make up the difference in energy savings. A heat pump runs on electricity and draws heat from the external air or from the ground, transferring warm air to cool air, and vice versa — in much the same way a refrigerator stays cold. As of 2014, geothermal heat pumps — which use the ground rather than outside air to provide heat and are considered to be the most efficient — still quality for a federal tax credit that includes installation costs. Heat pumps are best for moderate climates and might need to be used in conjunction with secondary heat sources, such as space heaters; they are not appropriate for areas with harsh winters, unless you have a high-performance home.
Est. $5,500 and up, installed Estimated Price

95 percent AFUE Boiler

High efficiency boiler:
Boilers heat water that is transferred to radiators, baseboard heaters or radiant floor systems throughout the home, thus providing heat circulation within a room. Hot water heating systems, also known as hydronic heating, are less common than forced air systems, but are the preferred form of heating system for many because this type of heat does not dry the air and circulates fewer airborne particles. Although this type of system is usually found in older homes, it’s becoming increasingly popular once again in new construction. As with furnaces, replacing an old, inefficient boiler with a new, high-efficiency unit can pay off very quickly, say experts. Boilers can be fueled by oil, gas or electricity, just as with other types of heating plants.

Est. $6,000 and up, installed Estimated Price

Radiant Floor Heating

Radiant floor heating:
Unless you have unlimited financial resources, it isn’t practical to replace your entire heating system with radiant floor heating, but installing radiant floor heating in a single, smaller room, such as a bathroom or kitchen, is becoming an increasingly popular option. Hydronic radiant heat systems bring heat up from the floor via hot water flowing through pipes; electric systems use cables built into the floor, or mats with electrically conducive plastics. Depending on your expertise, and the scope of the project, installing a radiant floor can be tackled by a professional here at Heating Repair Houston.

Or Call for more helpful information.

Water Heater Service Houston

water heater Houston

Water Heater Service in Houston

We are offering excellent deals on hot water heater installations to our Houston customers.

-40 gallon standard from State Water Heaters is $750
-50 gallon standard from State Water Heaters is $950
*Installed Price.

-40 gallon Rheem Standard Water Heater is $650
-50 gallon Rheem Standard Water Heater is $850

We also offer tankless hot water heating systems up to 8 GPM! Call for more infomation today!

Visit our website for information on all HVAC Services.

Heating Repair Houston – Furnace Specials

Heating Repair and Furnace Cleaning, Installation Houston

Receive a free heating repair service call (79.95 value) when we fix your furnace or home heating system. Our technicians are ready and qualified to get that heating system running to maximum efficiency.

free service call with repair

Furnace Installation Houston

We are now a Carrier dealer! We are offering excellent prices on installations of new Carrier, Bryant or Payne Furnaces. Check out our website for more information today.

Call to speak with a technician for all heating, furnace and boiler services in Houston.

Houston Furnace Repair Service Special

heating repair special

Heating Repair Houston – Furnace Repair Special

We are offering free trip charges* to Houston customers who need to repair or service any home furnace or boiler heating system in the month of October!

Let our trained HVAC furnace repair experts get your furnace, boiler or home heating system running to way its supposed to run with our great fall deals on all furnace, boiler and heating systems repair or maintenance specials.

Call or visit our website for more details on how you can get that furnace running properly.

Need maintenance? check out our furnace cleaning services here.

Furnace Maintenance Houston – Saftey Check

WE OFFER SAFETY INSPECTIONS ON THE FOLLOWING EQUIPMENT:

FURNACES – We recommend having a safety inspection performed on your furnace before the winter season. Please see the 21 point inspection list below for what is included with our furnace safety inspection.

WATER HEATERS – We recommend having a safety inspection performed on your water heater once a year.
A water heater safety inspection includes:
• Inspect the tank for accumulated sediment.
• Check the condition of the anode rod.
• Check for proper flame and gas venting (gas models).
• Check the condition of the heating element (electric models).
• Check the pressure relief valve’s operation.
• Check the thermostat.

BENEFITS OF SAFETY INSPECTIONS:

• Longer Lasting Equipment
• Savings on Utility Bills
• Avoid Costly, Unexpected Emergencies
• Peace of Mind for Your Home and Family

21 POINT FURNACE/AIR CONDITIONING SAFETY CHECKLIST:

• Inspect Outside Coil
• Check Air Cleaner/Filter
• Tag All Valves and Place
Warranty Sticker on Equip.
• Check Refrigerant Levels
(A/C Season)
• Check Condensate
Drain-Mold/Mildew Buildup
• Test Emerg. Shut-offs
and Electrical Disconnects
• Check Carbon Monoxide Levels • Check Humidifier Pads,
VV and Operations
• Check Fan Pulley and
Make Adjustments
• Check and Calibrate
Thermostat as Needed
• Test Electrical Contractor
• Test Electrical Capacitor
• Check & Test for Gas Leaks
• Check Burners for Corrosion
• Check Fan On/Off Delay • Check T-couple Fail/Sensor Timing
• Perform Motor Amp Test
• Check Draft Motor
• Perform High Limit Test
• Perform Vent Tests/Pressure Switch
• Perform Spill Switch Test
• Video Inspect Exchanger/
Coil/Blower

Call to learn more and schedule a appointment.

Is It Time to Replace your Furnace?

Thinking about Replacing your Furnace?

Fuel costs are real crazy these days, thanks in part to Hurricane Katrina unfortunately. For the most part though, gas is competitively priced, so it don’t make much sense to switch to oil or electricity. Standard 80% furnaces are already pretty efficient, but not as good as the best condensing-type gas furnaces, which capture up to 97 percent of the fuel’s energy. If your furnace were old and worn out, your decision would be easy—buy a more efficient model—but the average life of a well-maintained furnace is 25 years, so make sure you keep up with your furnace maintenance to keep it running as long and as efficiently as possible.

If you did replace your furnace with a 97 percent efficient system, you’d cut your heating bills around 20 percent. To see if it’s worth spending the money, add up the fuel bills for last winter—your gas utility will have records—then multiply that sum by 20 percent. Divide that figure into the cost of buying and installing the new system, about $3,000 or so, and you’ll see how many years it will take to recoup your investment.

Depending on the size of your house,  you’ll see a payoff  soon, even if you add 50 percent to last year’s bills to account for this winter’s projected increase in natural gas costs. Of course, every dollar that gas prices go up will shorten the payback time, but prices could also fall and lengthen the payback.  Anytime you increase the efficiency of your home heating system its always going to provide benefits.

If you decide to wait on replacing the furnace there are ways to reduce the heating load. Ask your utility company to perform an energy audit. That will probably uncover some relatively inexpensive upgrades, such as new weatherstripping or added insulation. Also, ask the company that maintains your furnace about ways to improve its performance. For instance, you might be able to replace a standard pilot light with electronic ignition or seal the joints in your ductwork. These minor improvements will help reduce heating costs and make you more comfortable without draining your bank account.

For advice on how your furnace can be more efficient check out our website and ask about our efficient furnace installations and furnace maintenance today.

Boiler Maintenance

Having your boiler serviced on an annual basis not only can save you money, but it can also reduce the risk of carbon monoxide poisoning and costly repairs of faulty boilers.

Why service my Boiler?
It is important to get any boiler serviced regularly to ensure they are not only safe, but efficient as well. Having a regularly serviced boiler can reduce your fuel costs by up to 10% annually.
+Appliances that are not properly maintained can emit carbon monoxide, exposure to which can be fatal.
+Any faults or problems with your boiler can be identified early on, reducing the chance of expensive repairs further down the line.

Boiler Service Checklist:
When undergoing a boiler service, you should expect your engineer to carry out the following:

Stripping down and cleaning the boiler heat ex-changer.
Cleaning the oil burner.
Inspecting your boiler for wear and tear.
Renewing the nozzle and filter if needed.
Re-assembly and testing to OFTEC requirements.
Checking the condition of the oil tank to ensure it meets Environmental Law regulations
The autumn season can be quite busy for boiler services, as people switch their heating systems back on. When arranging your boiler service, the summer months may be a better option, especially since you will need to turn off your boiler an hour before the service, leaving you without heating for a short time.

Benefits of Furnace Maintenance

Every year, at about this time, you probably receive several adds from different Houstonarea heating and cooling companies telling you to schedule a furnace tune-up. What many companies fail to tell you (and the reason most of those offers are ignored) is exactly why furnace maintenance is essential. Here are a few things about the importance of furnace maintenance.

Insuring proper airflow:
During the furnace tune-up, the heating technician should check your heating system to ensure it is receiving the proper airflow. Restricted or limited airflow places an unnecessary strain on your furnace that can lead to increased repairs and a shorter lifespan.

Keeping You Safe:

Furnaces burn fuel to produce heat. The combustion process must be precise to maintain efficiency, and safety.  A small simple problem can lead to gas leaking into your home or dangerous carbon monoxide levels. Don’t take a chance with the health and safety of your family.

Reducing repairs:
Every winter we receive calls from Houston-area residents with heating problems that could have been easily prevented with regular maintenance. A furnace tune-up not only includes cleaning that keeps your furnace running efficiently, but it also catches small problems before they turn into major repairs.

Getting a furnace tune-up now, before the weather is cold, is a wise decision that keeps you, and your family, warm. Rather than waiting for a repairman during the winter in a cold home without heat. It is also much cheaper.

Improving energy efficiency:
A furnace tune-up should include, the cleaning and inspection, of the furnace burner and heat exchange. This will keep your furnace running efficiently all winter.

Maintaining manufacturer’s warranty:
If your heater is under a manufacturer’s warranty, it is especially important for you to get an annual furnace tune-up. Most manufacturer’s stipulate that their warranty becomes void if the heater is not regularly maintained. A furnace tune-up can satisfy that requirement and maintain your warranty.